Table of Contents
Advertisement
1. Identification
Your push propulsion is equipped with a unique serial number. You will find this number on
the frame of your push propulsion. Below, you see an example of the frame label, where you
can find the identification number. Furthermore, you will find the explanation of the various
data stored on the frame label on the next page.
1.1
Frame label Click & Go Professional II
1.2
Explanation of the data on the frame label
1.
Production date: The date which your Click & Go was manufactured.
2.
Serial number: Every Click & Go has its own unique serial number. You need this
number when you have any technical questions or you want to order any parts.
3.
Maximum weight: The maximum weight allowed on the Click & Go.
4.
Type number: This number indicates which model of Click & Go you have. You need
this number when you have any technical questions or you want to order any parts.
5.
Model name: The model name of your Click & Go starts with the brand name. The
brand name, followed by the de additional model description forms the model name of the
push propulsion. You need the model name when you have any technical questions or you
want to order any parts of the push propulsion, in this case the Click & Go Professional II.
6.
Description: The intended use of your Click & Go is described here.
7.
Warranty: Here, the warranty period of your Click & Go is reflected. Chapter 8
Warranty describes the warranty
Smedemestervej 9 |5600 Faaborg | Denmark | T: +45 710205553 | E: office@faaborg-rehab.dk| W: www.faaborg-rehab.dk
3
5
6
4
7
© 2015 Click&Go, Faaborg Rehab Technic ApS
2
1
3/15
Advertisement
Table of Contents
