Faaborg Rehab Technic Click & Go Series User Manual page 16

Table of Contents

Advertisement

This warranty does not include any labor charges incurred by replacements. Replaced or
repaired parts fall under the same warranty conditions as the original push propulsion. Worn
parts are normally not guaranteed, unless these parts are worn as a direct result of an original
manufacturer defect. These parts are for example upholstery, tires, inner tubes and similar
kinds of parts. The warranty conditions above describe all push propulsion parts, and are
applied for the models bought at the normal price.
Under normal circumstances no responsibility is accepted when the push propulsion needs
replacement or repairs as a direct result from:
Not maintaining the push propulsion and parts according to the recommendations of the
manufacturer, or not using the specific original parts;
Damaging the push propulsion or parts by inattentive use, accident or wrong use;
Adjusting the push propulsion or parts, different from the specifications of the
manufacturer, or reparations done before the service agent is warned;
If the product is not equipped with an original factory frame number and identification
label as described in the manual, see chapter 1.
The push propulsion which is described and showed in this user manual can differ from your
own model in details. However, all instructions are relevant, independent of slightly different
details. We reserve the right to change the product in this user manual without further
notice. All drawings, measures and capacities showed in this manual, are approximations and
may be slightly different to your push propulsions specifications.
Smedemestervej 9 |5600 Faaborg | Denmark | T: +45 710205553 | E: office@faaborg-rehab.dk| W: www.faaborg-rehab.dk
© 2015 Click&Go, Faaborg Rehab Technic ApS
15/15

Advertisement

Table of Contents
loading

Related Products for Faaborg Rehab Technic Click & Go Series

This manual is also suitable for:

Click & go professional ii

Table of Contents