Maintenance; The Tires; Air Tires - Faaborg Rehab Technic Click & Go Series User Manual

Photo 14

6. Maintenance

Your Click & Go Professional II needs periodical maintenance. This is necessary for long and
optimum comfort for the user of the push propulsion. A badly maintained push propulsion
will give more technical problems, turn less flexible and it won't be covered by the warranty.
Preventive maintenance is very important. We advise you to check, at least once a year, your
push propulsion by a qualified Faaborg Rehab dealer. This dealer will only use correct
replacement parts. This annual inspection will make sure your push propulsion will work
perfect for years.
There are a lot of things you can do yourself to keep your Click & Go Professional II in
optimum condition. If you regularly check the push propulsion and perform (small)
maintenance, this will extend the lifetime and increase the ease of use. In the following
paragraphs this maintenance is further described.
6.1

The tires

You should check the tires of the push propulsion for wear regularly. If the wear is at an
advanced stage, you will have to replace the tires. Check the tires for the following points:
Check of the tires do not stuck;
•
Check of there is slack on the tires. If this is the case, it is common that the housing of the
•
tires is loose.

6.1.1 Air tires

The air tires should be checked weekly for inflation. The correct tire pressure is 36PSI / 2.5
BAR. You can measure the voltage of the tires themselves with a common voltage meter. If
the pressure is not properly set, the push propulsion will lean. This results in a faster worn on
the tires. The push propulsion drives less easy and the progress is much heavier.
Smedemestervej 9 |5600 Faaborg | Denmark | T: +45 710205553 | E: office@faaborg-rehab.dk| W: www.faaborg-rehab.dk
Photo 15
Photo 16
© 2015 Click&Go, Faaborg Rehab Technic ApS
Photo 18
Photo 17
11/15