Gps_Disable# Pin - Huawei ME906s LTE M.2 Hardware Manual

HUAWEI ME906s LTE M.2 Module
Hardware Guide
Figure 3-13 Connections of the W_DISABLE# pin
It is recommended not to add a diode on the W_DISABLE# pin outside the module.

3.4.6 GPS_DISABLE# Pin

ME906s provides a hardware pin (GPS_DISABLE#) to disable or enable the GPS. In
addition, the GPS can also be enabled or disabled through software AT commands.
Table 3-7 Function of the GPS_DISABLE# pin
No.
1
2
3
Figure 3-14 Connections of the GPS_DISABLE# pin
Issue 05 (2019-03-25)
GPS_DISABLE#
Low
High
Floating
Module
1.8V
(Modem)
BB Chip
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description of the Application Interfaces
Function
GPS function is disabled.
GPS function is determined by software AT
command. Default enabled.
GPS function is determined by software AT
command. Default enabled.
VCC From Host
10 kΩ
GPS_DISABLE#
Host
31