Displaying The Memory Viewer Screen; Playing The Pictures; Executing The Slide; Termination Of Memory Viewer - Panasonic PT-TW381R Operating Instructions Manual

Chapter 5 Operation of Function - Projecting with MEMORY VIEWER input

Displaying the Memory Viewer screen

1) Press the <MEMORY VIEWER/NETWORK> button on the remote control to switch the input source to
MEMORY VIEWER.
f Press the <INPUT> button on the control panel and select the input source in the input guide.
2) Attach the USB memory directly into the <USB A (VIEWER/WIRELESS/DC OUT)> terminal.
f The standby screen "please press RC ENTER" is displayed while the USB memory icon is displayed at the
lower left of the screen.
3) Press the <ENTER> button on the remote control.
f The root directory of the USB memory will be displayed in thumbnail on the screen.

Playing the pictures

1) Press asqw on the remote control to select a file you want to play on the memory viewer screen.
2) Press the <ENTER> button on the remote control.
f The picture will display on the full screen.
3) Press w to switch to the next picture, press q to return to the previous picture.
4) Press the <ENTER> button on the remote control.
f Return to the thumbnail screen.
Note
f When the recorded number of pixels is smaller than 1 280 x 800, it will be displayed enlarged maintaining the aspect ratio.
f When the recorded number of pixels is larger than 1 280 x 800, it will be displayed reduced maintaining the aspect ratio.
f When the recorded number of pixels is 1 280 x 800, it will neither be enlarged nor reduced, so degradation of image quality can be reduced.

Executing the slide

All the still images in the same folder will be played continuously according to the setting of [NETWORK] menu →
[MEMORY VIEWER].
1) Press asqw on the remote control to select a file.
2) Press the <MENU> button to select the [NETWORK] → [MEMORY VIEWER] → [SET SLIDE].
3) Press the <ENTER> button on the remote control.
f The slideshow will start.
f Press the <ENTER> button to return to the thumbnail screen.
Note
f If you press the <MENU> button during playback in the slideshow, the playback will stop and the a menu displays. The playing will continue
when the menu disappears.

Termination of Memory Viewer

1) Press asqw to select the thumbnail
2) Press the <ENTER> button on the remote control.
f Return to the standby screen "please press RC ENTER".
Depending on file path length, you may need to repeat Step 1) and Step 2) before returning to the standby
screen.
Note
f You can also exit Memory Viewer by switching to the input other than MEMORY VIEWER.
which is displayed on the upper left corner.
ENGLISH - 89