How To Adjust The State Of The Image - Panasonic PT-TW381R Operating Instructions Manual

When using the control panel
The input for projection can be selected by displaying the input guide with the control panel.
1) Press the <INPUT> button on the control panel.
f The input guide is displayed.
2) Press the <INPUT> button or the asqw buttons to switch the input.
f When the simple input guide is displayed, the input will switch each time you press the <INPUT> button.
f When the detailed input guide is displayed, press the asqw buttons to select the input.
Detailed input guide example
VIDEO IN COMPUTER 1 IN
Note
f You can switch the detailed/simple input guide by setting the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [INPUT GUIDE]
(x page 65).
f When the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [INPUT GUIDE] is set to [OFF], the input guide is not displayed.

How to adjust the state of the image

If the projected image or the position is not correct when the positioning of the projector and the screen is correctly
installed, adjust the projection angle and focus.
1) Adjust the projection angle.
f Place the projector on a level surface and make its front side parallel to the screen surface so that the
projection screen is rectangular.
f If the screen is tilted downward, extend the adjustable feet and adjust the projection screen so that the
projected screen is rectangular.
For details, see "Adjusting adjustable feet" (x page 43).
2) Adjust the focus.
f Rotate the focus ring to adjust the focus of the projected image.
42 - ENGLISH
Chapter 3 Basic Operations - Projecting
COMPUTER 2 IN HDMI IN
MEMORY VIEWER
Simple input guide example
NETWORK
COMPUTER1