Top
Projection direction
13 Control panel and Indicators
14 Lamp cover (x page 116)
The lamp unit is located inside.
rControl panel and Indicators
1 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power <v/b> button (v Standby / b Power on)
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
3 <INPUT> button
Displays the input source menu. (
4 <VOL-> button / <VOL+> button
Adjusts the volume level of the built-in speaker or the
Æ
audio output. (
page 44)
5 asqw buttons
Selects an item in the menu screen, changes the setting,
and adjusts the level.
Note
f In this manual, the operating procedure of menu screen is described by assuming that the projector is operated with the remote control
instead of the control panel.
24 - ENGLISH
Chapter 1 Preparation - About your projector
13
14
15
1
2
3
4
5
Æ
page 42)
Bottom
1
15 Focus ring
Adjust the focus.
6
7
INPUT
VOL-
VOL+
4
AV MUTE
8
Also used to select characters in the menu screen.
The w button can be used as the ENTER button when it
does not function as a direction button.
6 Warning indicator <WARNING>
Indicates the abnormal conditions of the projector.
7 <MENU> button
Displays or hides the main menu.
When the sub menu is displayed, pressing it will return to
the previous screen.
It can be used as ENTER button when the w button
functions as a direction button.
8 <AV MUTE> button
Used to turn off the audio and video temporarily. (
44)
9
1
Æ
page