Page 1
Radio / Cassette Palm Beach C50 Virginia DJ50 Operating instructions...
Page 2
Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b. Öppna Por favor, abrir Favor abrir...
Page 4
OPERATING ELEMENTS button to unlock release panel Volume control ON button, switches the unit on/ off, mute RDS button, switches the RDS convenience features on/off Selects display for variable text BND button, selects the FM memory bank and the MW and LW wavebands TS, starts the TravelStore function...
CONTENTS Repeating music tracks ....43 Important information .... 32 Scanning all of the cassette tracks Traffic safety ........32 (SCAN) ......... 43 Installation ........32 Switching the display mode ... 43 Accessories ........32 Resetting the counter ....44 Guarantee ........
Before you use your car audio system Amplifiers for the first time, please take the time to read the instruction manual carefully All Blaupunkt amplifiers can be used. and make yourself familiar with the au- CD changers dio equipment. Keep this manual handy The following CD changers can be con- in your car for future reference.
REMOVABLE FRONT PANEL When you remove the operating Removable front panel panel, the car audio system will au- Theft protection system tomatically switch off. To prevent your car audio system from All of the settings will remain being stolen, it has been equipped with stored.
SCHWITCHING ON/OFF Switching the car audio Switching the car audio system on by inserting a cassette tape system on/off If the system is switched off and there The car audio system can be switched is no cassette in the tape deck, on/off in a number of ways.
VOLUME CONTROL The volume at which phone calls or Adjusting the volume of the navigation voice output are heard can beep be adjusted. For a number of functions you will hear Press MENU 8. a beep if you press a key for longer than : repeatedly until “TEL/ 2 seconds, e.g.
RADIO OPERATION Note: Radio operation It is necessary to activate/deactivate This car audio system has been REG in the menu. equipped with an RDS radio receiver. Many FM radio stations now transmit Switching REG on/off the RDS signal, which contains such Press MENU 8.
RADIO OPERATION Tuning into radio stations Adjusting seek tuning sensitivity You can tune into radio stations in a It is possible to adjust the sensitivity of number of different ways. the seek tuning function to tune the ra- dio into stations with strong reception Automatic seek tuning signals only, or to those with weaker Press...
RADIO OPERATION SCAN will begin. “SCAN” will appear Storing radio stations briefly in the display, followed by the automatically (TravelStore) flashing station name or frequency of You can automatically store the six ra- the radio station currently being dio stations with the strongest reception scanned.
RADIO OPERATION Program Type (PTY) If you would like to select a different program type, press In addition to the radio station name, a while the program type is on dis- number of FM stations transmit informa- play to switch to another program tion on the type of program they broad- type.
RADIO OPERATION “SHARX OFF” means no bandwidth Optimising radio reception switching, “SHARX ON” means auto- Interference-related treble cut matic bandwidth switching. (HICUT) Press MENU 8 or OK ;. The HICUT function improves reception Selecting the display of variable when reception begins to deteriorate. If interference occurs, then the treble and text the noise is cut automatically.
TRAFFIC INFORMATION TAPE DECK OPERATION Traffic information Tape deck operation Switching traffic information Starting tape deck operation priority on/off If there is no cassette in the tape deck, Press TRAF ?. press Traffic information priority is activated when the traffic congestion symbol lights The flip release panel will open.
TAPE DECK OPERATION Changing cassette sides Scanning all of the cassette tracks (SCAN) To switch from SIDE A to SIDE B >. Press OK ; for longer than two and vice versa, press 2 seconds. Note: “CAS SCAN” will appear in the display. Once the tape reaches the end, it will Scanning will begin with the next track automatically switch to the other side...
TAPE DECK OPERATION Resetting the counter Switching Radio monitor on/off Press MENU 8. To reset the counter, press 5 MIX >. : repeatedly until “RM Press ON” or “RM OFF” appears in the Fast forward/rewind display. Fast forward : to switch Radio Press monitor on or off.
CDC A 08 CD changer. All of the duction, you should switch the Dolby CD changers listed in the section on “Ac- function on. cessories” can be used in combination with the Palm Beach C50. >. Press 6 Note: When the Dolby function is active, For information on how to handle CDs, will light up in the display.
CD CHANGER OPERATION Switching the display mode To play the tracks of all of the CDs in random order, press 5 MIX > To switch the display between the again. track number and elapsed playing “MIX ALL” will appear briefly in the dis- time or the track number and time, play, MIX will light up in the display.
CD CHANGER OPERATION : to move the cur- Interrupting playback (PAUSE) Press sor to a different input position. >. Press 3 Press MENU 8 or OK ; to store “PAUSE” will appear in the display. the name. Stopping PAUSE Deleting a CD name >...
CD CHANGER OPERATION CLOCK Release MENU 8. CLOCK All of the CD names stored will be de- Displaying the clock briefly leted. To display the time briefly, press Press OK ; to return to the menu. / DIS 7 briefly. Setting the time The time can be set automatically by the RDS signal.
Page 23
CLOCK : to alter the minutes. Displaying the time briefly when Press the car radio is switched off Once you have altered the minutes, :. The hours will begin to press To display the time briefly when the car flash. radio is switched off, : to alter the hours.
TONE AND BALANCE/FADER Adjusting the tone and Switching Loudness on/off balance/fader Loudness boosts the bass and treble when the volume is low to create a more Adjusting the bass natural sound. To adjust the bass, press AUD / LD Press AUD / LD = for approx. two seconds.
EQUALIZER Equalizer Make the settings for the equalizer as described under “What to do”. This car audio system is equipped with a parametric digital equalizer. In this Switching the equalizer on/off case, parametric means that it is possi- To switch the equalizer on, press ble to individually raise or lower one fre- and hold down DEQ <...
Page 26
EQUALIZER Press DEQ <. Selecting a sound preset : repeatedly until You can also select sound presets for Press the following types of music: “CAR PRESET” appears in the dis- play. CLASSIC : to select the de- Press sired car preset. JAZZ Press DEQ <...
Your car audio er, it is possible to connect two external system has been equipped with a TMC audio sources. output to which Blaupunkt navigation You must activate the AUX output in the systems can be connected. To find out menu.
Need help?
Do you have a question about the Palm Beach C50 and is the answer not in the manual?
Questions and answers