E2Prom Layout Version # (02H); Wifi External Component Setting (0X25); Nic Configuration 0 (0X34/0X35) - MEDIATEK MT7612 Manual

2.1

E2PROM layout version # (02h)

Value Description
0 Version 0.
1 ~ 255 Invalid version. Treat as version 0.
2.2

WiFi External Component Setting (0x25)

Offset Field
4:0
25h
7:5
External component GPIO usage will need to co-setting with 0x35 and 0x36.
2.3

NIC Configuration 0 (0x34/0x35)

7 6 5
Reserved Board
type
Reserved Reserve
d
Offset Field
3:0
34h
7:4
MediaTek Confidential
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
Reserved.
000: No external RF component GPIO ( iPAiLNA )
010 : Support external RF component GPIO (ePAeLNA)
110 : Internal PA 3 antenna mode for WIFI BT combo chip
0x35
4 3 2 1
Reserved PA External
driving PA
Reserved PA
driving
NIC Configuration 0 Register Bit Fields Description
RX front-end architecture in the system.
0 (0000): Reserved.
1 (0001): 1 RX front-end in the system.
2 (0010): 2 RX front-end in the system.
3 ~ F (0011 ~ 1111): Reserved.
TX front-end architecture in the system.
0 (0000): Reserved.
1 (0001): 1 TX front-end in the system.
2 (0010): 2 TX front-end in the system.
3~ F (0011 ~ 1111): Reserved.
© 2013 MediaTek Inc.
This document contains information that is proprietary to MediaTek Inc.
Description
0 7 6 5
TX Path setting
1:1TX
2: 2TX
Description
MT7612
EEPROM Content
Confidential B
0x34
4 3 2 1
RX Path setting
1: 1RX
2: 2RX
Page 11 of 32
0