Silvercrest SSMS 600 D4 Operating Instructions Manual page 30

NOTICE
► NEVER fill the bowl
appliance does not function optimally.
■ Place the bowl lid
lugs on the edge of the bowl
lid
■ Place the motor unit
symbol
NOTICE
► Should you wish to keep foodstuffs in the bowl
of the bowl
and motor unit
bowl
Operation
WARNING! RISK OF INJURY!
► Foodstuffs should not be too hot. Squirting contents may cause scalding.
NOTICE
► When you beat cream with the whisk
the beating. In this way the cream will be thicker quicker. Ensure that cream
cannot be sprayed out of the container while it is being beaten. When
whipping cream, slide the speed regulator
When you have assembled the blender set as you wish to use it:
1) Insert the plug into a mains power socket.
2) Press and hold the switch
Slide the speed regulator
Slide the speed regulator
3) Press and hold the turbo-switch
By pressing the turbo-switch
immediately.
4) When you have completed the processing of the foodstuffs, simply release
the switch
SSMS 600 D4
BEYOND the MAX marking. Otherwise, the
onto the bowl
. Please ensure that the blade
on the bowl lid
. Turn the motor unit
and use it as a lid. For this, carefully remove the bowl lid
and, if needs be, the blade
and then place it onto the bowl
/ .
and turn it until tight. Thereby, the
must be guided into the rail on the bowl
is correctly engaged in the bowl lid
so that the arrow points to the
until the arrow points to the symbol
. Loosen the base of the
.
hold the container at a slant during
to position "Max".
to process foodstuffs at the standard speed.
in the direction of "Max" to increase the speed.
in the direction of "Min" to reduce the speed.
to process foodstuffs at a higher speed.
the maximum processing speed is available
you can remove the base
GB │ IE │
27
.
.
■