Advertisement
Project
Model Specified:
Construction, Hardware and Insulation
Cabinet exterior front, louver assembly and doors are constructed of 20 gauge
stainless steel. Cabinet sides (including returns), interior and door liners are
constructed of anodized aluminum. The exterior cabinet top and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are
included.
Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Both the cabinet and doors are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA
1-Section Models
Net capacity cu. ft.
25.6 (719 cu l)
Length - overall in.
29
7
⁄
(75.9 cm)
8
Depth - overall in.
37
15
⁄
16
Depth - over body in.
32 (81.3 cm)
Depth - doors open 90° in. 83
3
⁄
(211.8 cm)
8
1
Clear door width in.
21
⁄
(53.6 cm)
8
Clear half-door height in.
27
1
⁄
(69.9 cm)
2
5
Clear full-door height in.
57
⁄
(146.3 cm)
8
Height-overall on 6" casters 83
1
⁄
(211.5 cm)
4
No. Standard Shelves
3
1
Shelf area sq. ft.
18.8 (1.75 sq m)
ELECTRICAL DATA
Voltage
115/60/1
Feed wires with Ground
3
Full load amperes
4.7
REFRIGERATION DATA
Refrigerant
R-134a
2
BTU/HR H.P.
1520 (
SHIPPING DATA
Length - crated in.
35 (89 cm)
Depth - crated in.
43 (109 cm)
Height - crated in.
83
1
⁄
(212 cm)
2
Volume - crated cu. ft.
71 (2011 cu l)
Net Wt. lbs.
305 (138 kg)
Gross Wt. lbs.
395 (179 kg)
NOTE: Figures in parentheses reflect metric equivalents.
1=
Figure shown reflects the area of standard shelf compliment plus the additional storage area available on
the cabinet bottom.
2=
Based on a 90 degree F ambient and 20 degree F evaporator. For remote data please refer to spec sheet
13-2.
Equipped With One NEMA 5-15 P Plug
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12"
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12" above is required in order to perform certain maintenance tasks.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35885 (revised 6/08)
TRAULSEN
SECTION
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
4-5
Website: www.traulsen.com
2-Section Models
48.8 (1371 cu l)
52
1
⁄
(132.4 cm)
8
(96.4 cm)
37
15
⁄
(96.4 cm)
16
32 (81.3 cm)
83
3
⁄
(211.8 cm)
8
1
21
⁄
(53.6 cm)
8
27
1
⁄
(69.9 cm)
2
5
57
⁄
(146.3 cm)
8
83
1
⁄
(211.5 cm)
4
6
34.6 (3.21 sq m)
115/60/1
3
7.3
R-134a
1
1
⁄
HP)
2410 (
⁄
HP)
4
3
63 (160 cm)
43 (109 cm)
83
1
⁄
(212 cm)
2
131 (3711 cu l)
450 (204 kg)
590 (268 kg)
NOTES
Quantity
Specifications
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, large, high humidity evaporator coil located outside the food
zone and a top mounted non-electric condensate evaporator. A 9' cord and plug is
provided. Standard operating temperature is 34 to 38°F.
Controller
The easy to use water resistant microprocessor control system is supplied standard.
It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale
Display Capability.
Interior
Standard interior arrangements include three (3) epoxy coated wire shelves per
section, mounted on shelf pins, installed at the factory. Shelves are full-width, and
do not have any large gaps between them requiring the use of "bridge" or "junior
shelves." Recommended load limit per shelf should not exceed 225 lbs.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2
and labor warranty is also available.
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Item #
CSI Section 11400
nd
year extended parts
Advertisement
