1. Manuals
  2. Brands
  3. GoMax Electronics Manuals
  4. Matrix Switcher
  5. MA-5544V
  6. User manual

GoMax Electronics MA-5544V User Manual

4k-hdr 4x4 hdbaset lite matrix with poc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
MA-5544V
4K-HDR 4X4 HDBaseT Lite Matrix with
PoC
User Manual
The MA-5544V
safety regulations and requirements, and has been certified for international use. However, like all
electronic equipments, the MA-5544V should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a stable
surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.

TABLE OF CONTENTS

INTRODUCTION............................................................................................................. 1
FEATURES ..................................................................................................................... 1
PACKAGE CONTENTS .................................................................................................. 2
SPECIFICATIONS .......................................................................................................... 3
PANEL DESCRIPTIONS ................................................................................................. 4
IR PASS-THROUGH ....................................................................................................... 5
CONNECTION DIAGRAM .............................................................................................. 6
OPERATION APPROACH .............................................................................................. 7
EDID LEARNING .......................................................................................................... 22
FAQ .............................................................................................................................. 23
NOTICE ........................................................................................................................ 24
WARRANTY ................................................................................................................. 25
rev: 190308
Made in Taiwan
4K-HDR 4x4 HDBaseT Lite matrix with PoC
has been tested for conformance to

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MA-5544V and is the answer not in the manual?

Questions and answers

Related Manuals for GoMax Electronics MA-5544V

Summary of Contents for GoMax Electronics MA-5544V

  • Page 1: Table Of Contents

    However, like all electronic equipments, the MA-5544V should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

  • Page 2: Introduction

    (up to 7.1-channel) 3. When used in conjunction with the EX-57VAC-I-SP-RX receiver digital audio from any of the four HDMI sources to the remote displays at the same time. MA-5544V (a) The MA-5544V can support resolution downscaling from 4K2K to 1080P supports all 3D formats, the true 4K 2K video and provides one HDMI local loopout.

  • Page 3: Specifications

    SPECIFICATIONS PANEL DESCRIPTIONS Model Name MA-5544V Technical MA-5544V Front Panel True 4x4 matrix switcher Role of usage Transmitter [TX] HDMI compliance HDMI 2.0a HDCP compliance Video bandwidth Single-link 600MHz [18Gbps] Video support HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits) Audio support Surround sound (up to 7.1ch) or stereo digital audio...

  • Page 4: Ir Pass-Through

    IR Blaster IR Receiver IR Sockets MA-5544V All IR Out: The default location for IR blaster to transmit all IR command signals received from any of the one remote receivers to all of the HDMI sources. IR BLASTER 1-4: IR blaster connected here can only transmit IR command signals from the remote receivers that are setting at respective input channel from 1 to 4.

  • Page 5: Operation Approach

    OPERATION APPROACH 2. Example of function key Operation Procedure 7-Segment LED Method A: Push-in Button Output Status Status + A~D(Output 1~4) + Clear 1.Press “STATUS” button Ex: Output 4 2.Press number key “D” to select Output 4 (Input 2) 3.Press “CLEAR” button Save Current Mapping Save + A~H(1-8 storage site) + Take 1.Press “SAVE”...
  • Page 6 1. System Requirement 1. I/O Mapping Tab 1) OS Information: MS WinXP/7/8.1/10 2) Baud rates: 115200 3) Software size: 2 MB 4) Minimum RAM requirement: 256 MB Power ON/ Standby mode I/O Mapping Tab Control SW via RS-232 EDID Tab Control SW via Network Rename I/O Tab System Tab (for Network Setting, System...
  • Page 7 2. EDID Tab 3. Rename I/O Tab  Learn EDID from Default to Input  Select Default EDID(1-17 Default EDID)  Select designated Input  Rename I/O  Click “Apply” button to learn from default EDID  Rename the Inputs ...
  • Page 8  4. System Tab  Read the device’s MAC address information  System – Factory Reset  To do factory default reset  System – Firmware Version  To get the F/W version information  Firmware Update Before you start to update, please make sure you have secured the connection between your computer COM port and the device.
  • Page 9  Click the button to select the firmware file which you want to write into  Click the button to select the file which you want to write into device device  Click the button and the firmware will start to update ...
  • Page 10  Method D: Web Interface Control Recall Mapping  Select the stored Mapping 1~8 The default IP address: 192.168.1.70  Click “Recall” button to recall previous saved mapping 2. Rename I/O, Mapping Tab I/O Routing Tab Rename I/O, Mapping Tab EDID Tab Power ON/Standby mode 1.
  • Page 11 3. EDID Tab Method E: Cloud Control (Eagleyes) through Ethernet port Create Account The first time to use the Eagleyes service, please create a new account. Access Eagleyes (http://www.eagleyes.io) and click “Create new account”.  Learn EDID from Default  Select Default EDID (1-17 default EDID) 2.

  • Page 12: Edid Learning

    EDID LEARNING Add Device to Eagleyes 1. Firstly, please make sure the device is connected to the Ethernet. Then please executing the software with device to get the association code (Note: the status of software is connected). The EDID learning function is to resolve audio and video playing issues at HDMI output port. Because the HDMI source devices and displays may have various level of capability in playing audio and video, the general principle is that the source device will output the lowest standards in audio format and video resolutions to be commonly acceptable among all HDMI displays.

  • Page 13: Faq

    NOTICE 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve Can I use any kind of LAN cable? and provide DVI/HDMI EDID information. Please check the NOTICE section for more information about how to pick up a suitable cable. 2.

  • Page 14: Warranty

    SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the MA-5544V features and specifications is subject to change without further notice.

Table of Contents