Table of Contents
Advertisement
37: FM900 Field Personality Programmer (FPP) Guide:
This section has been added for remote users who have an EPROM burner and need to setup their own
EPROM for 6 Meters, 2 Meters or 70 CMeters. The information below is applicable to FPP Version 3.0 – the
altered version.
Hardware Code
made up of eight digits: (ie: ABCDEFGH)
The hardware code for a FM92E with remote head for 6 Meters = 92240000
A - always 9 for FM900 mobiles
B – 1 = High Simplex (FM91)
2 = Medium Simplex (FM92)
3 = Low Simplex (FM93)
7 = FM92 with FM91 PCBs (FM97)
C - Band
2 = E
3 = B
4 = A
5 = T
6 = U
7 = W1 band
8 = W2 band
NOTE:
These are the suggested Transmitter limits, however Receiver limits can
be programmed up to 30 MHz either side of the specified band edge. No
guarantee of PLL lock, however.
D – Radio Type
E – Mechanical Construction 0 = standard
(when using a waterproof radio, a waterproof option in the hardware)
F – Signalling Hardware
Note on Selcall encode & decode: Selcall type 1 can both send selcalls
and
respond
applicable. Selcall type 2 can both send selcalls and respond to and
Philips FM92E Conversion to 6 Meters:
band
( 66- 88 MHz)
band
(132-153 MHz)
band
(148-174 MHz)
band
(403-440 MHz)
band
(440-470 MHz)
(470-500 MHz)
(500-520 MHz)
1 = local
2 = remote control 25.0 KHz Channel Spacing 10.7MHz IF
3 = local
4 = remote control 25.0 KHz channel spacing 21.4MHz IF
5 = local
6 = remote control 12.5 KHz Channel Spacing 10.7MHz IF
7 = local
8 = remote control 12.5 KHz channel spacing 21.4MHz IF
1 = extended temperature, 5ppm (crystal heater)
2 = waterfroof
3 = extended temperature & waterproof
5 = extended temperature TXCO
7 = extended temperature range, waterproof TXCO
0 = none
1 = CTCSS encode only
2 = CTCSS encode/decode
3 = No CTCSS, Selcall type 1(G=>1)
4 = CTCSS encode, Selcode type 1
5 = CTCSS encode/decode, Selcode type 1
6 = No CTCSS, Selcode type 2
7 = CTCSS encode, Selcode type 2
8 = CTCSS encode/decode, Selcode type 2
to
only
one
control 25.0 KHz Channel Spacing 10.7MHz IF
control 25.0 KHz Channel Spacing 21.4MHz IF
control 12.5 KHz Channel Spacing 10.7MHz IF
control 12.5 KHz channel spacing 21.4MHz IF
(Selcall type 1 = encode only)
(type 2 = encode/decode selcall)
received
selcall
Version 3.9
code
and
group
Page 72
call
if
Hide quick links:
Advertisement
Table of Contents
