15: Initial Pull-Apart:
•
Remove top & bottom covers from Philips FM92E transceiver.
•
Place top & bottom covers into A4 plastic GLAD bag.
•
Place all screws into small plastic GLAD bag.
16: Board Layouts:
•
All boards are hinged from the front.
•
To swing boards upright to allow access to the component side, unscrew the screws on the blank side of
the boards, that have an arrow pointing to those screws.
•
The screws do not screw all the way out.
•
The RF Board has normally 6 screws to undo for the board to swing out.
•
The Synthesiser Board has normally 4 screws to undo for the board to swing out.
Philips FM92E Conversion to 6 Meters:
RF Board:
Version 3.9
Page 18