Cisco ASR 920 Series Installing Manual page 3

Installing the Cisco ASR 920 Series Router
Figure 1: Rack-Mounting Brackets
1 19-inch brackets
3 ETSI-rack brackets
• For 19-inch racks, use part number 700-39959-01 (see Attaching Brackets for 19-Inch Racks section).
• For 23-inch racks, use part number 700-40065-01 (see Attaching Brackets for 23-Inch Racks section).
• For ETSI racks, use part number 700-40067-01 (see Attaching Brackets for ETSI Racks section).
Note
The bracket mounting screws are pre-installed on the router. Depending on the bracket mounting position of
the chassis, you must remove the appropriate screws, fix the bracket, and install the screws again.
Attaching Brackets for 19-Inch Racks
The following figure shows how to attach brackets for 19-inch racks on the router.
2 23-inch brackets
— —
Attaching Brackets for 19-Inch Racks
Installing the Cisco ASR 920 Series Router
3