[ Operation ]; Power On And Off; Button Operation - Neoline X-COP 8700 User Manual

[ Operation ]

1. Power On and Off.

1.1. When you start an engine at the condition of the power cord is connected, X-COP 8700 will be power
on and start the self-test and then become a Stand-by mode.
Current car speed and time are showing on the display.
1.2. To power off X-COP 8700, turn off a car engine or press PWR/MENU button for two seconds.
1.3. When you power off by pressing PWR/MENU button, 3-beeps will be announced and display will show
LOGO and blinking.

BUTTON operation

2.
2.1. Left Button
2.1.1.
2.1.2.
2.2. DOWN/UP Button
2.2.1.
Short Press : enter into SET mode.
Or Power On operation at Power Off condition.
Or Change the setting order at Setting mode.
Long Press : Power Off operation.
Or save the setting value at Setting mode, and then go back to Stand-by mode
Normal operation : VOLUME Level change (0 ~ 8 level)
(Logo Animation Display for 2 seconds)
(Stand-by display)
Blinking
6