Filling The Water Tank; Using Your Machine - Dyson Pure Humidify+Cool User Manual

Filling the water tank

Before you remove the water tank,
make sure humidification modes are
turned off.

Using your machine

Push down the water tank release buttons
on the sides of your machine.
Slide the water tank out of your machine.
Carry the water tank by its handle to the tap,
and unclip the cap.
Amplifier loop
Deep clean cycle button
Standby button
Shroud release buttons
Shroud
Water tank release buttons
MAX level
Fill the water tank to the Max level
with cold tap water.
Replace the cap and secure the cap
clips in place.
Slide the water tank back into your
machine until it clicks securely in place.
Standby
Auto purify
mode
Airflow
speed
Oscillation
Sleep timer
4
Information
menu
Auto humidify
mode
Humidity
control
Airflow
direction
Night mode