Washes
8.5
This section allows to program the automatic cycle
and management of the washes:
• date of last wash visualization;
• enabling the automatic wash
• enable wash at each start-up;
• wash cycles number configuration;
• wash duration configuration (min);
• rinse duration configuration (sec);
• setting the minimum interval between 2 washes
(hours);
• setting the automatic wash time;
• display and reset of performed washes number.
To change the data, use the buttons
or the display keyboard
To switch from one page to another, select the key
.
0 = Disabled function
1 = Enabled function
32
76
of
and
.
,
Reset data
TECHNICIANS manual