Parameter Programming; Access - Wega MyConcept EVDP 2GR Use And Maintenance Manual

8.

PARAMETER PROGRAMMING

This paragraph deals with the programming menu
that allows the user to program the various functions
of the machine.
All these operations are performed using the touch-
screen display.

Access

8.1
Programming can be accessed in two ways:
• by USB stick.
• by password.
Access by password does not allow some functions offered by the
USB stick, such as updating, loading and/or saving the data.
TECHNICIANS manual
8.1.1 Access by USB stick.
• Insert the USB stick into the port (12);
• select the bar on the right side of the display;
• select the menu key
• select the service configuration key
12
The USB port must only be used with the specific stick provided to
Qualified Technicians. Do not connect external devices (iPhone,
iPad, PC, etc.) to the USB port because it could create serious
problems in the machine software.
;
.
27 76
of