Grease Filter(S) - Miele DA 3466 Operating And Installation Instructions

Grease filter(s)


Fire hazard
An oversaturated grease filter is a fire
hazard.
Clean the grease filter at regular
intervals.
The re-usable metal grease filter in the
appliance remove solid particles from
the kitchen vapours (grease, dust, etc.),
preventing soiling of the cooker hood.
The grease filter must be cleaned at
regular intervals.
A heavily soiled grease filter hinders
air extraction and will lead to
increased levels of soiling in the
cooker hood and in the kitchen.
Cleaning interval
Accumulated grease solidifies over a
longer period of time and makes
cleaning more difficult. The grease
filter(s) should therefore be cleaned at
least every 3 to 4 weeks.
Removing a grease filter

When handling a grease filter, be
careful not to drop it.
This can result in damage to the filter
and the hob below.
Make sure you hold the filter securely
at all times when handling it.
Cleaning and care
When removing the grease filter do
not tilt it downwards at an angle.
This can damage the retaining pins.
 With the deflector plate pushed in,
grip the front of the deflector plate
and hold the grease filter securely.
Whilst holding the grease filter pull
the deflector plate out as shown.
 Then lower the grease filter
downwards to remove it.
 Switch off the fan.
Cleaning the grease filter by hand
 Clean the filter with a soft nylon brush
in a mild solution of hot water and a
small amount of washing-up liquid.
Do not use "neat" washing up liquid.
21