Troubleshooting; Error Code - Fora D40g Quick Start Manual

Troubleshooting the FORA D40g
Error Signal Codes

Troubleshooting

If there is an error, the device will show ERR in the screen along with a code. Refer to your manual for the error code listing. If you are
having trouble establishing a signal, please move the device into a more open area, or closer to a window.

Error Code

Err 1
Err 2
Err 3
Err 4
Err 5
PCL Err 30
PCL Err 40
PCL Err 41
PCL Err 42
PCL Err 43
PCL Err 44
PCL Err 45
PCL Err 48
PCL Err 49
For questions on the 24/7 HealthView, please contact RN Staffing Solutions via phone at
For questions on how to use the FORA medical devices, please contact the
rnstaffingsolutions@gmail.com.
FORA Customer Service Line at 1-888-307-8188
For questions on how to use the FORA medical devices, please contact FORA Customer Service Line at 1-888-307-8188.
RN Staffing Solutions, LLC. New York
What It Means
Inflation or pressure error.
Cuff pressure is too high.
No pulse rate detected or the pulse rate is too
low.
Appears when the batteries cannot provide
enough power for a test.
Unable to connect to the service.
No response from the server.
Service error.
Failure connecting to the service.
Connection overtime.
Command failure.
Data upload error.
Problem connecting to the service.
| Toll Free: 718-720-7242
Solution
Refit cuff tightly and correctly.
Relax and repeat the measure-
ment. If the error still remains,
please contact customer service
for help.
Replace or recharge the
batteries immediately.
Turn the device off and on again
to reestablish a signal. For a
better signal, move the device
into a more open area or closer to
a window. If the problem still
persists, please contact customer
service for assistance.
718-720-7242
| www.rnstaffingsolutions.com/
or via email at