Table of Contents
Advertisement
2. DESCRIPTION OF THE COMPONENTS
The part reference includes the following (See Fig. 1).
(PU) Portable hydraulic pump: motor-driven at 18V DC current, battery powered for autono-
mous use. Provided with a pressure transmitter that ensures precision and repeatability of the
work cycles and a maximum pressure valve to ensure maximum operator safety. The memory
card integrated into the pump allows the storage of the data relating to up to 200,000 previous
operating cycles.
The pump can be connected to hydraulic heads produced by Cembre for compression (max.
230 kN), cutting and punching.
Main components (Ref. to Fig. 2):
1 - STRAP FASTENING RING
2 - BATTERY RELEASE
3 - BATTERY
4 - SIDE POCKET
5 - REMOTE CONTROL CONNECTOR
6 - MECHANICAL PRESSURE RELEASE
(FH) Flexible hose: length 2 m (6.5 ft) specifi c for high pressure; provided with automatic quick
couplings; enables connection of the hydraulic head to the pump.
(BC) Battery charger (diff ers depending on the pump version): for recharging the batteries sup-
plied; has "AIR COOLED" charging technology and a processor for managing charging cycles.
To use, carefully follow the instructions in the battery charger user manual.
(RB) Rechargeable battery (2 pcs): 18 V - 4.0 Ah high capacity Lithium Ion battery.
Provides 100% of its energy between -15 and +50 °C.
Electronic control of the individual cells to prevent over-charging and under-discharging.
Greater longevity and ventilated recharging in short times thanks to AIR COOLED technology.
Timed automatic power off to optimise energy consumption.
Equipped with LED indicators that indicate the remaining
battery life at any time by pressing the button (P):
4 LEDs illuminated: fully charged
2 LEDs illuminated: 50 % capacity
1 LED flashing: minimum charge, replace the battery.
With the battery inserted in the pump, the remaining battery
life can also be checked on the display of the remote controller,
via touch button selection (Ref. to § 4).
The display alongside indicates that the battery is low and the pump
will not start (Ref. to § 4.6).
The approximate time to fully recharge a battery is about 80 minutes.
7 - SWIVEL ATTACHMENT
8 - QUICK COUPLING
9 - CONTROL BUTTON
10 - HANDLE
11 - OIL FILLER CAP
P
max.
BATTERY
min.
BATTERY
BATTERY
8
Advertisement
Table of Contents
