Advertisement
OPERATION
Carefully unpack the unit and remove all packaging materials. Place the unit on a flat, heat-
resistant, non-flammable surface. Clean the surface of any dust with a damp cloth and
remove any stickers (except for any warning/caution stickers).
Operating Instructions:
1.
Connect the power adapter and the display will flash before going on standby.
2.
Press and hold "POWER" for 2 seconds to get the appliance ready. Press
"POWER" again to switch off.
3.
Slide the left side slider to set heating temperature and the appliance will enter
heating mode.
4.
Press "TIME+" or "TIME-" to set time: the display will show the set time, then flicker
to indicate is being confirmed, after which it will enter countdown mode.
Note:
The appliance will beep to confirm each input.
If the display shows "E1", "E2" or "E3", this indicates it has detected a fault: contact
Kogan.com
Suggested Cooking Times (Approx.)
Food
Pork chop
Chicken
Steak
Chicken wings
Fish
Pork ribs
Cooking using Pot/Pan
Note:
The temperature can be adjusted during operation.
Temperature
180-270°C
180-270°C
180-270°C
180-270°C
180-270°C
180-270°C
100-360°C
Time
18min
25min
14min
18min
9min
30min
Maximum 60min
Advertisement
