Before Using For The First Time; Setting The Temperature - TEFAL PRECISION Manual

do not dismantle it under any circumstances. It is advisable to have it examined.
Apart from cleaning and descaling in accordance with the procedures set out in the
appliance's instructions, all other work on the appliance must be carried out by an
approved TEFAL Centre.
• This product has been designed for domestic use only. Any commercial use,
inappropriate use or failure to comply with the instructions, the manufacturer accepts
no responsibility and the guarantee will not apply.
• Any connection error renders the guarantee invalid.
• The guarantee does not cover kettles that do not work properly or do not work at all
because they have not been descaled.
• Unplug the appliance if you are not going to use it for a long period and when you
are cleaning it.
• Do not use abrasive pads for cleaning.
• To remove the lime scale filter, take the kettle off its base and let it cool down. Never
remove the filter when the kettle is filled with hot water.
• Do not leave unattended whilst in use.
• Never use another method of descaling than the one recommended in this guide.
• All appliances are subject to strict quality control. These include actual usage tests on
randomly selected appliances, which would explain any traces of use.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children must be supervised to ensure that they do not play with the appliance.
• Do not operate the kettle without water inside.
• Never fill the kettle above the maximum water level or under the minimum level. If
the kettle is overfilled, water may be ejected.
• This appliance is intended to be used only in the household. It is not intended to be
used in the following applications, and the guarantee will not apply for:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses,
- By clients in hotels, motels and other residential type environments,
- Bed and breakfast type environments.

Before using for the first time

• Remove all the packaging, stickers and various accessories both inside and outside of
the kettle.
• Adjust the length of the cord by coiling it under the base. Pinch the cord in the slot.
(fig. 1)
• Rinse the inside of your kettle and filter separately. Boil 2 or 3 kettlefuls. Discard the
water from these first two/three uses as it may contain dust.
16
1) Place the base on a smooth, clean and cold surface.
Your kettle must only be used with its own base and its own anti-lime scale filter
2) To open the lid:
• Remove the lid by turning to the left and lifting (fig. 2)
• To lock the lid, click it on and turn right.
3) Fill the kettle with the desired amount of water. (fig. 3).
You can fill it by the spout by pressing on the trigger, which ensures better
maintenance of the filter.
Never fill the kettle when it is on its base.
Do not fill it above the maximum level or below the minimum level. If the kettle is
overfilled, boiling water may be ejected.
Do not use without water.
Check that the lid is properly closed before use.
4) Plug in the base, then place the kettle on its base . Ensure that the power cord is
arranged so that the base is stable and flat. The display will show 100°C if this is the
first use otherwise it will show the last temperature used. Start the heating cycle by
pushing the ON/OFF/OK button, a BEEP sound will come from the base and the button
will flash red. Familiarize yourself with the display and the various functions of the
kettle by referring to figures 6 and 7 :
Electronic base (fig. 6):
ON/OFF button
A
Keep warm button
B
+/- button for the choice of temperature and duration of the keep warm cycle
C
D Digital display
Digital display:
Heating or keeping warm temperature in Celsius
E
Time left in the keep warm cycle
F
Small clock time logo
G
H Keep warm logo

Setting the temperature

• This electronic kettle can heat water to the temperature of your choice.
• Once plugged in, the digital display on the kettle shows "100°" if it's being used for
the first time. Otherwise, the screen displays the last temperature programmed.
• Using the "/ -" buttons, choose the temperature to which you want to heat the water.
You can select a temperature between 60 and 100°C in steps of 5°C. Then press the On-
Off button to confirm your temperature.
• The heating cycle starts and the red light comes on.
• The pre-selected heating temperature is displayed on the digital screen (fig. A)
17
Use