Husqvarna PP 492 Operator's Manual page 8

Menu system overview
1
>MENU
DRIVE CHOICES
15
CALIBRATE ARM
16
SET BLADE DIAM.
[800 mm]
2
SETTINGS
3
SERVICE
PRODUCT INFO
Main menu Submenu
4. "SET GEAR"
5. "SET DRIVE
MODE"
6. "SET ROT. DIR."
1. "DRIVE
CHOICES"
7. "SET FUSE"
8. "SET WATER
VALVE"
8
20 DEC 20:55 >>DRIVE CHOICES
SET GEAR
[-]
SET DRIVE MODE
[-]
SET ROT. DIR.
[STANDARD]
SET FUSE
[-]
SET WATER VALVE
[-]
09317
CHANGE NUMBER WITH
STEP FORWARD WITH OK
Adjustment
The wall saw has 2 mechanical gears:
1. (600-900 rpm)
2. (800-1200 rpm)
Set the necessary "DRIVE MODE" for the product:
• "BLADE" for wall sawing
• "WIRE" for wire cutting
• "CHAIN" for chain sawing
Stop the product before change of direction of the blade. Select be-
tween:
• "STANDARD"
• "REVERSE"
To use full power output, the product must be connected to a 32 A fuse.
With a fuse that is lower rated, the power output must be lower to not
overload the fuse. Select the applicable fuse rated value that is related to
the connected product:
• 16A
• 25A
• 32A
The water flow is adjusted with the ball valve at the water connector inlet.
Select correct water regulation:
• "ON" - The water valve is always open.
• "AUTO" - The water valve opens when the dial is turned from its
closed position.
20 DEC 20:55
>>SETTINGS
RUN TIME
20 DEC 20:55
TIME & DATE
[20:51 2010-01-12]
OK
LANGUAGE
[ENGLISH]
SET UNITS
[METRIC]
PAIR RADIO
RADIO CHANNEL
[0]
4
5
6
7
8
20 DEC 20:55
10
11
12
13
14
967 - 001 - 04.02.2020
9