typical GC6880 Instruction Manuals For Control
  1. Manuals
  2. Brands
  3. typical Manuals
  4. Sewing Machine
  5. GC6880
  6. Instruction manuals for control
typical GC6880 Instruction Manuals For Control

typical GC6880 Instruction Manuals For Control

High speed 1-needle flatbed sewing machine
Hide thumbs Also See for GC6880:

Advertisement

Table of Contents

GC6880
INSTRUCTION BOOK FOR CONTROL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GC6880 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for typical GC6880

Summary of Contents for typical GC6880

  • Page 1 GC6880 INSTRUCTION BOOK FOR CONTROL...
  • Page 3 Safety Instruction Users are required to read the operation manual completely and carefully before installation or operation. 2. All the instruction marked with sign must be observed or executed; otherwise, bodily injuries might occur. 3. The product should be installed and pre-operated by well trained persons. 4.
  • Page 4 Button Displays and operating instructions Key Description Name Indicate Icons Execution starting back seam B segment or execution starting back seam (A, B Start /End segment) 1Execution starting back seam (A, B segment) 2 times Back-Tacking Execution terminates back seam C segment or execution terminates back seam Selection (C, D segment) 1 Execution terminates back seam (C, D segment) 2 times Freedom...
  • Page 5 trimming and motor stops. 4．Two icons are both LED OFF=Presser Foot is inactive. 1．The corresponding icon lights, slow starting sewing open. Slow play seam shortcuts 2．The corresponding icon is not lit, no slow-starting sewing function. 1． The corresponding icon lights, thread nipper function is turned on. Clamp function keys 2．...
  • Page 6 Parameter Parameter Function Range Default Description Stitch Numbers for Soft Start 0-99 Soft Start Stitches Setting ( one unit = half stitch) Automatic Constant-Stitch Constant-Stitch sewing speed【034.SMP】 is set at 200-4000 3700 ） Sewing Speed（ A(or when one shot signal is active) The Stitch-Correction is valid in sewing stop.
  • Page 7 Parameter Parameter Function Range Default Description A：One shot to pedal, it will automatic execute Mode Selection for Constant-Stitch Constant-Stitch Sewing M：Pedal-controlled and motor can stop arbitrarily 0 : No Action 1: Wiper Action Wiper Function Selection or 0-11 2-11: Thread Clamp action and the pressure gradually Thread Clamp Pressure Setting increased）...
  • Page 8 Parameter Parameter Function Range Default Description location (only with magnet motor) It will automatic come down when foot lifter keep lift Protection time for foot lifter （ ） 1-120 over the setting time. Up Position Adjustment The needle will advance stop when the value Up Position Adjustment 0-1440 decreased.
  • Page 9 Parameter Parameter Function Range Default Description 0-330 Thick start angle 0-330 The thick end angle Encoder start angle View manual 1.4 chapter Error Code List Error Code Problem Strategies Power Module is faulty. System will be shut down until the power resets on. Abnormal over current or voltage.
  • Page 10 Port Outline Diagram The Name of each port 4.2： 14P Function Port Table...
  • Page 11 This machine may only be operated by adequately trained operators only after having completely read and understood the instruction manual. Parts are subject to changes in design without prior notice. VETRON TYPICAL EUROPE GmbH Clara-Immerwahr-Str. 6 67661 Kaiserslautern, Germany Tel.: +49 6301 320 75-0 Fax: +49 6301 320 75-11 info@vetrontypical.com...

Table of Contents

Save PDF