Sound Settings; General Settings; General; Radio - Blaupunkt SAN MARINO 350 Operating Instructions Manual

Sound Setting | General setting

Sound settings

Audio distribution (fader/balance)
You can adjust the sound distribution in the vehicle
for all sources.
In the main menu or on the control bar of the current
E
audio source, press the [ EQ ] button.
The equalizer menu is displayed.
E
Press the [ ] button.
E
The menu for fader and balance is displayed.
E
Adjust fader & balance with [
E
Reset fader and balance to 0 with [
E
Turn on the [Loud] button to increase bass at low volume.
E
Equalizer
You can adjust the equalizer for all sources.
In the main menu or on the control bar of the current
E
audio source, press the [
The equalizer menu is displayed.
Select a preset equalizer via the buttons.
E
- Or -
Press the [User] button to set the levels of the available
E
frequency bands according to your preferences.
Note:
With the [ ] button, you can reset the customised setting
again.
].
].
] button.

General settings

In the settings menu, you can adjust the general settings for
the different functions of the device to suit your
requirements.
In the main menu, press the [Settings] button.
E
The settings menu is displayed, the General sub menu is
activated.
Call up the sub menus with the menu bar.
E

General

The following settings are possible:
Beep - Switch confirmation beep on/off.
Back Camera Mute - Switch voice output on/off when
reversing.
ON Volume - Select the preset volume level every time the car
audio system is switched on.

Radio

The following settings are possible:
Radio region – Select the reception region for radio
reception.
RDS – Turn on/off RDS function.

Video

The following settings are possible:
Aspect ratio - Setup display aspect ratio.
Parking Signal - Turn parking detect on/off.
Camera mirror - Invert rear camera image.

SWC

– The buttons of the connected steering wheel control
can be configured here.

Wallpaper

– Select favorite wallpaper for home menu.
Date and Time
– Set date and time.
The following settings are possible:
Date – Set the date.
Clock mode – Select between 12 and 24-h mode.
Time – Set time.

Display

The following settings are possible:
Brightness - Adjust screen display brightness.
Contrast - Adjust screen display contrast.
Color - Adjust screen display color.
Press [ Reset ] to return to factory default settings.
Software version
– Displays current software version.
The following settings are possible:
Load factory reset – Resets all personalised settings.
13