Download Print this page
Consort Frost Fighter Instructions

Consort Frost Fighter Instructions

Multi purpose heater

Advertisement

Quick Links

C
LEANING
Always disconnect the appliance from the mains before cleaning.
The appliance should not require any maintenance, but it is strongly advised that it is kept clean.
An occasional wipe over with a soft cloth is all that should be necessary.
Do NOT use metal or furniture polish on any part of the appliance.
Do NOT touch the appliance with wet hands.
If the supply cord on this appliance is damaged, it must be replaced by a cord which is available from an
Authorised Service Dealer.
I
Y
H
D
N
W
F
OUR
EATER
OES
OT
ORK
Check that the plug is firmly pushed into the wall socket with the socket switched to ON.
Check that the socket is live by using another appliance in it. (If is not live check the fuse at the
distribution board).
Check that the plug is wired correctly.
Check that the plug fuse has not blown. (This can be done by replacement with another suitable fuse).
If you are replacing a fuse in the plug a 5 Amp fuse approved by ASTA to BS1362 must be used.
Check and read section under Thermal operated cut-out.
Should none of the above remedies work then disconnect heater from the mains and consult an
accredited service agent.
If the appliance is still under guarantee, return it to your supplier.
IMPORTANT – ALWAYS RETAIN YOUR USER INSTRUCTIONS FOR FUTURE REFERENCE.
S
AFETY
This equipment has been designed and manufactured to the highest international standards, but, like all
electrical appliances which are operated by mains voltage, care must be taken if you are to obtain the best results
and safety is to be assured.
NOTE: The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance
Ensure that nothing is pushed into any aperture of this appliance.
Do NOT touch outlet grille when appliance is in use.
Do NOT cover or restrict any aperture of the appliance when in use.
Do NOT use the appliance if damaged.
Do NOT leave the appliance unattended where young children are present.
This appliance meets the requirements of EMC Directive 89/336/EEC.
G
UARANTEE
This guarantee is offered to you as an extra benefit and does not affect your legal rights.
All electrical appliances produced for the Company are guaranteed for one year against faulty material or
workmanship. This applies only if the appliance has been used for purposes in accordance with the instructions
provided and has not been connected to an unsuitable electricity supply, or subject to misuse, neglect, damage or
modified or repaired by any person not authorised by us.
The correct electricity supply voltage is shown on the rating label attached to the appliance.
C
H
USTOMER
ELPLINE
Should you need any advice on the use of your new Consort product, or should you require service or repair,
please contact our Helpline:
Operating hours: Mon to Thu 8.30am to 4.30pm | Fri 8.30am to 3.30pm
Consort Equipment Products Limited
Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Tel: 01646 692172 | Fax: 01646 695195
Email: technical@consortepl.com | Web: www.consortepl.com
48000035 Iss 09
Quality Space Heaters
Using and looking after your
Frost Fighter
Multi Purpose Heater
Catalogue Numbers: UHA05 & UHA10S
Please read and retain these instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the Frost Fighter and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Consort Frost Fighter

  • Page 1 The correct electricity supply voltage is shown on the rating label attached to the appliance. USTOMER ELPLINE Should you need any advice on the use of your new Consort product, or should you require service or repair, please contact our Helpline: Operating hours: Mon to Thu 8.30am to 4.30pm | Fri 8.30am to 3.30pm...
  • Page 2 2.5 mm of the screws, excluding A ‘Frost Fighter’ position is marked on the unit. This is the lowest setting on the the head, is left exposed, see Diagram C. thermostat and represents approximately 5 Position unit on wall locating screws into keyhole slots.