Router Configuration; Dynamic Routing; Static Routing - Uniden UIP1868P Interface Manual

Hide thumbs Also See for UIP1868P:

Table of Contents

UIP1868P Administrator's Guide and Software Reference

Router Configuration

Dynamic routing allows the UIP1868P to learn routing tables from other network

devices by means of the Routing Information Protocol (RIP). With RIP, network

devices can broadcast messages containing information on the status of network

connections.

its connections. RX Mode means we listen to and process RIP messages, TX Mode

means we send RIP information to other routers..

RX Mode

Select

to have the UIP1868P process any RIP messages it receives from

ENABLED

other network devices. Select DISABLED to have the UIP1868P ignore any RIP

messages it receives.

TX Mode

Select

to have the UIP1868P broadcast RIP messages to other network

ENABLED

devices. Select

DISABLED

Static routing lets you configure particular IP addresses to be routed to the LAN port

or the WAN port of the adapter.

Dest IP Address

Enter the IP address of the device you want to configure static routing for. Any

Ethernet packets destined for this IP address will be routed according to this

configuration.

Subnet Mask

Enter the subnet mask of the destination device.

Gateway IP

Enter the IP address of the gateway (i.e., the next router in the network path) to the

destination device.

Page 18 of 26

to prevent the UIP1868P from broadcasting RIP messages.

Table of Contents