Dhcp Client Table - Uniden UIP1868P Interface Manual

UIP1868P Administrator's Guide and Software Reference
Client IP Address Range
Enter the range of IP addresses available to local devices. The UIP1868P can
support 32 IP addresses, and the address range must be consecutive numbers
between 1 and 255.
Client Network Information
Domain Name
Enter the domain name used by the local LAN, if any.
DNS Server 1 & 2
Enter the IP addresses of the primary (1
the local LAN.
Static Address Assignments
Complete this information to make the UIP1868P assign the same IP address to a
device every time. Assign a static IP address if the device serves as a host for any
Internet services. You can assign up to eight static IP addresses.
To assign new static IP addresses, click Add. Once a static IP address is assigned,
you can remove it by clicking the Remove button beside it.
Identify Using
Select whether you want to identify the local device by a
.
ADDRESS
Host Identifier
Enter the name or the MAC address of the host.
Internal Address
Enter the IP address you want the DHCP server to assign to this device.

DHCP Client Table

The DHCP Client Table screen displays the name and ID (based on the MAC
address) of connected devices; it also shows the IP address and how long each
address is leased.
Page 16 of 26
st
) and secondary (2
HOST NAME
nd
) DNS servers used by
of by the
MAC
© Uniden America Corp., 2005