Handling - WEG GPW Series Installation, Operation And Maintenance Manual

3.3 HANDLING

Proper handling
Improper handling

The alternator was designed with eyebolts for lifting. These eyebolts are designed to lift only the alternator; additional
loads are not permitted;

Cables and lifting devices must be appropriate.
NOTES

Observe the weight informed.

Do not lift and do not put the alternator on the ground suddenly to avoid damage to the bearings.

To lift the alternator, use only the existing eyebolts. If you necessary, use a beam to protect parts of the
alternator.

The eyebolts on the covers, bearings, terminal box, etc., are intended to handle these components only.

Never use the shaft to lift the alternator.

To move the alternator, the shaft must be locked with the locking device supplied with the alternator.
ATTENTION
Steel cables, clevises and lifting equipment must be appropriate and able to withstand the weight of the
alternator so as to avoid accidents, damage to the alternator and injuries.
Figure 3.1: Proper handling
Figure 3.2: Improper handling
Installation, operation and maintenance manual
www.weg.net
|
17