Advertisement
4
en | Safety
Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Follow all warnings before operating the
device.
–
Clean only with a dry cloth. Do not use liquid cleaners or
aerosol cleaners.
–
Do not install device near any heat sources such as
radiators, heaters, stoves, or other equipment (including
amplifiers) that produce heat.
–
Never spill liquid of any kind on the device.
–
Take precautions to protect the device from power and
lightning surges.
–
Adjust only those controls specified in the operating
instructions.
–
Operate the device only from the type of power source
indicated on the label.
–
Unless qualified, do not attempt to service a damaged
device yourself. Refer all servicing to qualified service
personnel.
–
Install in accordance with the manufacturer's instructions in
accordance with applicable local codes.
–
Use only attachments/accessories specified by the
manufacturer.
–
Permanently connected devices must have an external,
readily operable mains plug or all‑pole mains switch in
accordance with installation rules.
–
Disconnect power supply and arrange for the device to be
serviced by qualified personnel if:
–
–
–
–
2016.8 | 1.0 | AM18-Q0715
www.a1securitycameras.com email: sales@a1securitycameras.com
The power cable/plug is damaged.
Liquids or foreign bodies have entered the device.
The device has been exposed to water or extreme
environmental conditions.
The device is faulty despite correct installation/
operation.
Available from A1 Security Cameras
IR Illuminator 5000
Bosch Security Systems
Advertisement
