Advertisement
10
en | Connection
Setting up
To achieve the best results set up at night and view the results
on a monitor.
1. Mount the illuminator and connect as described above.
2. Adjust the pan of the illuminator to match the camera's
field of view.
3. Loosen the bolts on each side of the unit and adjust the
vertical alignment to maximize the results:
–
–
4. Re-tighten the bolts.
2016.8 | 1.0 | AM18-Q0715
www.a1securitycameras.com email: sales@a1securitycameras.com
Tilt the unit downwards until the near part of required
field of view is saturated with light as viewed on the
monitor.
Slowly tilt the unit upwards until the furthest part of
the required field of view is illuminated correctly on
the monitor.
Available from A1 Security Cameras
IR Illuminator 5000
Bosch Security Systems
Advertisement
