Troubleshooting - Proline VCBS2225 Operating Instructions Manual

TROUBLESHOOTING

Please check the following details before you have your appliance
repaired by an authorised servicing agent.
Problem
Vacuum cleaner
does not work.
Suction power
becomes weak.
Power cord will
not fully feed
back.
Power cord can
not be pulled
out.
No suction power
regulation.
Possible Cause
1. Check if the power plug
is firmly inserted into
the power outlet.
2. Check if the power
switch of the appliance
is on.
1. Check if the hose,
floor brush or tube is
clogged or damaged.
2. Check if the dust
tank is full.
3. Check if the filter is
clogged, the tube is
correctly attached.
Check if the power
cord is twisted.
The power cord may be
twisted.
The suction power
regulation device may
be faulty.
EN-10
Possible Solution
1. Insert the plug back
into the power outlet
and ensure it is
switched on.
2. Then turn the
vacuum power switch
on.
1. Immediately remove
the obstruction.
2. Empty the dust tank.
3. Clean the filter or
reassemble the tubes.
Pull out the power cord
at its optimal length and
rewind it.
Rewind or pull the cord
in and out several times
by pressing the cord
rewind button.
Restart the appliance
several times. If it still
does not work, contact
an authorised servicing
agent.