We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Adjusting the monitor
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
Hold the stand to prevent the monitor from falling when you change its angle.
You can adjust the monitor's angle from +35˚ to -5˚and it allows
adjustment from either left or right. You can also adjust the monitor's height
within +/- 130 mm.
-5° ~ +35°
Lift the monitor to the highest position.
Tilt the monitor to its maximum angle.
Pivot the monitor clockwise/counterclockwise to the angle you need.
The VESA wall mount kit (100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
Chapter 2: Setup