2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
Hold the stand to prevent the monitor from falling when you change its
angle.
•
The recommended adjusting angle is -5˚ to 20˚.
•
2.3
Detaching the arm (for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA
wall mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes. (Figure 1)
3.
Remove the base. (Figure 2)
4.
Use a screwdriver to remove the screw on the hinge (Figure 3), then
remove the hinge.
(Figure 1)
2-2
-5°~+20°
It is normal that the monitor slightly shakes while you adjust the viewing angle.
20°
0°
1
2
(Figure 2)
20°
1
2
(Figure 3)
Chapter 2: Setup