Advertisement
Available languages
Available languages
ENGLISH
5.0 Installation completed
See the General user and maintenance manual for Jøtul F
370 Advance (item no. 10050848) for use and maintenance
of the product!
5.1 Painting the surround
All surrounds are delivered unpainted.
Painting may take place the day after installation. Use latex
paint. If a slight surface texture is desired mix a little tile cement
in with the paint.
5.2 Minor imperfections
After the fi replace has been installed you should smooth over
any minor imperfections or unevenness in the concrete using
the included cement fi ller.
•
In order to achieve the best result the surround should
be rubbed down with fi ne sandpaper, smoothing any
unevenness or sharp edges prior to painting.
•
Apply one coat of paint.
•
Mix the powder (cement fi ller) with water to form a smooth
paste (with the same consistency as toothpaste).
•
Smooth any unevenness, allow to dry and rub down with
fi ne sandpaper.
•
If the imperfections are deep we recommend that you
apply the fi ller in applications in order to prevent the fi ller
from sinking.
•
Paint once more with the desired colour.
5.3 Cracks
After several month's usage small cracks may appear in the
joints due to settling. These cracks can easily be repaired:
•
Open up the cracks with, for example a screwdriver, in
order to give more space for the fi ller.
•
Remove any dust with a vacuum cleaner.
•
Inject an acrylic fi ller into the cracks and smooth over with
a wet soapy fi nger.
•
After a couple of days the join may be painted.
34
6.0 Optional equipment
Off set pipe, 50 mm
Item. no. 51013630
External air supply, Ø 100 mm
Item. no. 51012164
Heat-accumulating stones
Item. no. 10026701
Advertisement
