Solmeta GMAX-EOS2 Instruction Manual page 33

Set the air pressure unit
1.While the LCD shows
menu will flash.
2.Press or
3.1 If you prefer the unit as inHg, press
displayed and the flashing char will be stable.
3.2 If you prefer the unit as bar, press
displayed and the flashing char will be stable.
3.3 If you prefer the unit as HPA, press
displayed and the LCD will show
calibration mode is activated.
To do the calibration, press
value is adjusted to the reference value of your location, press
to complete the calibration.
Note
The calibration value is default by factory. You can only do the
calibration when the reference value of your local observatory
issued is available. The factory default cannot be changed even
perform the restore setting.
Set GPS/BDS working frequency and the working time of each
time in Auto mode
1.While the LCD shows
will show
to change the option
How to do the custom setting?
press
while a blinking
while a flashing
while a flashing
or to adjust the value. While the
press
and the option
it means the
and the LCD
30