Solmeta GMAX-EOS2 Instruction Manual page 13

Checking camera < GPS> Icon
When the receiver is attached or connected to a camera, it can
enable the menu item [GPS device settings], GPS signal
status is also shown on the camera's LCD panel or LCD monitor.
Blinking < GPS>: Signal not acquired yet
Constant <GPS>: Signal acquired
The <GPS> icon is only displayed when the receiver is
communicating with the camera.
Take picture and the images are geotagged
When the receiver attached or connected to a camera and the
GPS icon is also constant, simply shoot and the images will be
geotagged.
The image can also be tagged with the shooting direction using
the receiver's digital compass. (Except with the EOS 7D,
EOS1300D/Rebel T6, and EOS 1200D/REBEL T5)
Latitude
Longitude
Elevation
UTC (Coordinated Universal Time)
Geotagging Image as you shoot
10