Solmeta GMAX-EOS2 Instruction Manual page 31

4.2.2 If you prefer using the sea level pressure as the reference to do
the calibration, while the LCD shows
the value on the bottom will flash. Press
value.While the value is adjusted to the sea-level pressure issued
by the local observatory, press
4.2.3 If you prefer using the altitude as the reference to do the calibration,
while the LCD shows
the bottom will flash. Press
value adjusted to the altitude of your location which is known in
advance, press
Set what kind of time to be shown on the LCD, UTC or Local time
1.While the LCD shows
will flash.
2.Press or
3.1 If you prefer the UTC, while a flashing
press to confirm your selection.
3.2 If you prefer the local time, press
press again to complete the calibration.
to complete the calibration.
to change the option
How to do the custom setting?
or
and the LCD will show
press
or and to adjust the value. While the
press
while a flashing
press
and to adjust the
and the value on
and the option menu
displayed,
and
28