Samsung MWR-WG00UN Installation Manual page 7

Wired Remote Controller Installation Wired Remote Controller Installation
3 Using two or more screws, firmly affix the rear cover of the remote controller to the wall, and then cut off the
grooves of the front covers for communication and power cables, making sure these cables have reasonable
length.
inch) or more
inch) or more
or more
space of upper side, left side,
space of bottom side.
4 Connect the communication cables (F3, F4) to the terminals of the back of the front cover, and then fix the wires
so that they do not get stuck during connection.
F1 F2
terminal with excessive force.
CAUTION
When using an electric screwdriver, tighten the screws to the standard torque because the top of screws may be
worn out if you use a strong torque.
6 English
Screw hole
Rear cover
Indoor
V1 V2 F3 F4
Wire (not supplied)
Wired
Remote
Controller
Front cover
PCB terminal
screws into the
screw holes.