Wired Remote Controller Installation - Samsung MWR-WG00UN Installation Manual

Wired Remote Controller Installation

1 Insert the flat-head screwdriver into two square grooves at the bottom of the Wired Remote Controller and rotate
it to lift the front cover for removal from the rear cover.
2 Arrange the power cable and the communication cable so that they fit in the housing along the edges of the rear
cover.
Area A
<When the cable is not concealed>
NOTE
When connecting the power and communication cables to the bottom of the Wired Remote Controller, first cut
off the area A.
8 cm (3.15 inch) 8 cm (3.15 inch)
<When the cable is concealed>
English 5