BEFORE YOU BEGIN
Ensure that you have the following information from your service provider:
- How your INTERNET SERVICE will physically connect to the gateway, see below.
- The Settings specific to your type of service.
There are two ways to connect the gateway to the internet service:
Ethernet WAN
This is the most common access type in Australia and New Zealand and covers fixed line techonologies
such as nbn™ FTTP, HFC, FTTC as well as nbn™ Fixed Wireless and Sky Master satellite services.
This type of internet service uses the blue WAN port on the back of the gateway to connect
to the dedicated connection box installed by your access network provider.
Refer to page 10
ADSL or VDSL
These access types are provided by nbn™ FTTB, FTTN or ADSL/VDSL over a traditional telephone line.
This connection uses the grey DSL port on the back of the gateway.
Refer to page 12
9
Need help?
Do you have a question about the NetComm CloudMesh NF18MESH and is the answer not in the manual?