Internet Type; Installing The Gateway - Casa Systems NetComm CloudMesh NF18MESH Quick Start Manual

HEADING
GOES HERE
1
Connect the Ethernet cable
supplied by your network carrier
to the blue WAN port on the
back of the gateway and then
connect the other end to your
network carrier's upstream
device, for example an FTTP
gateway or HFC cable modem.
Ovitas nam accus aut
1
ad quas volupta tatio.

INSTALLING THE GATEWAY

Nam nis is pos alique
eaquam
VIA ETHERNET
utempor ehendip issitem
vollesed moloribus et
10 10

INTERNET TYPE

2
Connect the included power
adapter to the power jack of
the gateway and then plug it
into an available wall socket.
Press the ON/OFF button
to power the gateway
on. The POWER light
initially will turn red.
When the gateway has
finished starting up, the
POWER light will turn green.
2
unduciisqui
CONNECTIONS
Ovitas nam accus aut
ad quas volupta tatio.
Nam nis is pos alique
eaquam unduciisqui
utempor ehendip issitem
vollesed moloribus et
3
To connect using WiFi, use your
computer to scan for wireless
networks and select the WiFi
Network Name and use the WiFi
Password (both are printed on the
back of the gateway) to log on.
Alternatively, connect the supplied
yellow RJ45 Ethernet cable
from your computer to one of
the yellow Ethernet ports (1-4)
on the back of the gateway.
Once the connection is established,
go to the LOG IN TO THE
WEB INTERFACE section of
this guide on page 14.
Ovitas nam accus aut
3
ad quas volupta tatio.
Nam nis is pos alique
eaquam unduciisqui
utempor ehendip issitem
vollesed moloribus et