Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SJC brands tasman Essentials Palermo
Summary of Contents for SJC brands tasman Essentials Palermo
- Page 2 Parts List 60 mm Base and panel connectore bolts x 12 Metal cross Side panels x 2 dowel x 12 Headboards x 2 Capping screws Base x 1 Due to the heavy nature of the cot, it is recommended assembly is undertaken by two people. Warning Safety Consideration for your Child.
- Page 3 Fit capping screws to alternate base holes For newborn babies up to 6 months that cannot sit up attach the base using the upper bassinet base holes and connnect the capping screws to lower cot base holes. For babies over 6 months or babies that can sit up attach the base using the lower cot base holes and connnect the capping screws to the upper bassinet base holes.
- Page 4 Connect the base to the assembled rear panel and headboards Connect the base to the assembled headboards and rear panel, using 4 x base connector bolts and 4 x metal cross dowels. (Fit the base in the upper bassinet postion for babies under six months and who cannot sit up, fit the the base in the lower cot postion for babies over 6 months or who can sit up) Fit the back of the base first allowing the front of the base to rest on the ground Insert the metal cross dowel into the back left base hole and insert the connector bolt through the headboard and...
- Page 5 Converting your cot into a Toddler / Junior Bed To convert the Palermo into a toddler bed the base must be in the low position To convert the Palermo into a child’s sofa either base position can be used To convert the Palermo cot into a Junior bed / Toddler bed / childs sofa remove the front panel Loosen the 4 x base connector bolts by approx 3 mm to allow the headboards to spread slightly when removing the front panel Remove the 4 x front panel connecting bolts and remove the front panel...
- Page 6 2. There is damage to the product and that damage is deemed by SJC Brands Pty Ltd to be caused by incorrect assembly, misuse or by use or storage outside of the physical or environmental specifications of the product.
Need help?
Do you have a question about the tasman Essentials Palermo and is the answer not in the manual?
Questions and answers