TP-Link TL-R402M User Manual page 42

Before setting up MAC Filtering entries, you must ensure that Enable Firewall and Enable MAC
Filtering have been selected on the Firewall page. To Add a MAC Address filtering entry, click the
Add New... button. The page " Add or Modify a MAC Address Filtering entry" will appear,
shown in Figure 4-26:
Figure 4-26 Add or Modify a MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC address into the MAC Address field. The format of the MAC
address is XX-XX-XX-XX-XX-XX
00-0E-AE-B0-00-0B.
2. Type the description of the PC in the Description field. Fox example: John's PC.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to save this entry.
To add additional entries, repeat steps 1-4.
When finished, click the Return button to return to the MAC Address Filtering page.
To Modify or delete an existing entry:
TL-R402M
Figure 4-25 MAC Address Filtering
(X is any
35
Cable/DSL Router User Guide
hexadecimal digit). For example: