TP-Link TL-R402M User Manual page 17

If you Choose "Static IP", the Static IP settings page will appear, shown in Figure 3-8:
IP Address - This is the WAN IP address as seen by external users on the Internet (including
your ISP). Enter the IP address into the field
Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0
Default Gateway - Enter the gateway into the box if required
Primary DNS - Enter the DNS Server IP address into the boxes if required
Secondary DNS - If your ISP provides another DNS server, enter it into this field
Note: The IP parameters should have been provided by your ISP.
Click the Next button, then you will see the Finish page:
After finishing all configurations of basic network parameters, please click Finish button to exit
this Quick Setup.
TL-R402M
Figure 3-8 Quick Setup - Static IP
Figure 3-9 Quick Setup - Finish
10
Cable/DSL Router User Guide