Ip Address Filtering - TP-Link TL-R402M User Manual

Enable Firewall - The general firewall switch is on or off
Enable IP Address Filtering - Set IP Address Filtering is enabled or disabled. There are
two default filtering rules of IP Address Filtering, either Allow or Deny passing through the
router
Enable Domain Filtering - Set Domain Filtering as enabled or disabled
Enable MAC Filtering - Set MAC Address Filtering is enabled or disabled. You can select
the default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router

4.7.2 IP Address Filtering

The IP Address Filtering feature allows you to control Internet Access by specific users on your
LAN based on their IP addresses. The IP Address Filtering is set on this page, Figure 4-21:
TL-R402M
Figure 4-20 Firewall Settings
30
Cable/DSL Router User Guide