Overview Of The Dsc Factory Settings; Appendix; Specifications - Blaupunkt SEVILLA RD 126 Operating Instructions Manual

PTY LANG To select the programme
type language:
DEUTSCH or ENGLISH
SCANTIME Use this function to set the
scan time for the radio or
CD player from between five
and 30 seconds.
S-DX To adjust the seek tuning
sensitivity for distant recep-
tion.
DX 1 - high sensitivity
DX 3 - low sensitivity
S-LO To adjust the seek tuning
sensitivity for local recep-
tion.
LO 1 - high sensitivity
LO 3 - low sensitivity
The seek tuning sensitivity
values can be separately set
for AM and FM.
44
VOL FIX Use this function to select
the volume at which the ra-
dio is set when it is switched
on. Adjust the desired vol-
ume level with << >>. When
adjusted to "VOL 0", the
system will come on with the
volume selected before
switching the radio off.
To quit the DSC programming mode
and store the adjustment:
• Press DSC.
Overview of the DSC factory
settings
LOUDNESS 3
TA VOL 35
SPEECH 0
BEEP 4
ANGLE 0
BRIGHT 16
LED ON
LEARN KC -
READ KC -
PTY LANG ENGLISH
SCANTIME 10 sec.
S - DX 1
S - LO 1
VOL FIX 0

Appendix

Specifications

Amplifier
Output power: 4 x 23 W RMS power
acc. to DIN 45324 at
14.4 V
4 x 35 W max. power
Tuner
Wavebands:
FM : 87.5 – 108 MHz
MW : 531 – 1602 kHz
LW : 153 – 279 kHz
0.9 µV at 26 dB signal-
FM sensitivity:
to-noise ratio
FM frequency response:
30 - 16 000 Hz
CD player
Frequency response:
20 - 20 000 Hz
Subject to modifications!