Table of Contents
Advertisement
EQUIPMENT MISUSE HAZARD
General Safety
Any misuse of the spray equipment or accessories,
such as overpressurizing, modifying parts, using
incompatible fluids and chemicals, or using worn or
damaged parts, can cause them to rupture and
result in injection or other serious bodily injury, fire,
explosion or property damage.
NEVER alter or modify any part of this equipment;
doing so could cause it to malfunction.
CHECK all spray equipment regularly and repair or
replace worn or damaged parts immediately.
Read
and
follow
manufacturers recommendations regarding the use
of protective clothing and equipment.
System Pressure
This system has a 3000 PSI (207 bar) MAXIMUM
WORKING PRESSURE. Be sure that all spray
equipment and accessories are rated to withstand
the maximum working pressure of this heater.
HOSE SAFETY
The operating and safety features of the heater
used in this system are designed to be used in this
system are designed to be used only with Graco
heated hoses.
Models 218-613 and 218-614.
NEVER attempt to connect other hoses to this
heater.
High pressure fluid in the hoses can be very
dangerous. If the hose develops a leak, split or
rupture due to any kind of wear, damage or misuse,
the high pressure spray emitted from it can cause a
fluid injection injury or other serious bodily injury or
property damage.
TIGHTEN all fluid connections securely before each
use.
High pressure fluid can dislodge a loose
coupling or allow high pressure spray to be emitted
from the coupling.
Never use the hose until the couplings are properly
insulated and the hose abrasion cover is in place.
3 684-027
the
fluid
and
solvent
DO NOT exceed the maximum working pressure of
any component or accessory used in the system.
Be sure that all spray equipment and accessories
are rated to withstand the maximum working
pressure of this system.
NEVER install any fluid shut off device at the fluid
outlet of either heater or filter. Shutting off the fluid
at the outlet causes high back pressure which can
cause component rupture and result in serious
bodily injury.
Fluid Compatibility
BE SURE that all fluids and solvents used are
chemically compatible with the wetted parts shown
in the Technical Data on the back cover. Always
read the fluid and solvent manufacturer's literature
before using them in this sprayer.
Never operate the hose when it is coiled. Do so
causes excessive heat buildup which can result in
hose rupture and cause serious bodily injury;
including injection, and property damage.
NEVER use a damaged hose. Before each use,
check entire hose for cuts, leaks, abrasion, bulging
cover, or damage or movement of the hose
couplings. If any of these conditions exist, replace
the hose immediately. DO NOT try to recouple high
pressure hose or mend it with tape or any other
device. A repaired hose cannot contain the high
pressure fluid.
HANDLE AND ROUTE HOSES CAREFULLY. Do
not pull on hoses to move equipment. Do not use
fluids or solvents which are not compatible with the
inner tube and cover of the hose. DO NOT expose
Graco hose to temperatures
(82°C) or below -40°F (-40°C).
above
180°F
Advertisement
Table of Contents
